Push Fit Joints

This type of joint is quite a modern form of joining pipework when carrying out plumbing work. The range of push fit joints is extensive and this joint is more than able to cope with pressurized water systems that are found in the home. Harrow Boiler Repair are qualified professionals that guarantee their work.

The secret for the push fit joint is to ensure that it is assembled in the correct way prior to use by inserting it fully into the fitting, pushed all the way up until it reaches an internal stop. Now the joint itself is achieved by the clever fitting of an internal “O” ring at manufacture. When elbow or bend joints are used they have the advantage that they are able to be swiveled around in any direction even if the pipe contains water at the time. Because of this freedom of movement the pipework does not need or bend joints are used they have the advantage that they are able to be swiveled around in any direction even if the pipe contains water at the time. Because of this freedom of movement the pipework does not need that prevents withdrawal. However they can be dismantled and reused should the need occur. To remove a push fit joint, push the end collet tightly into the fitting whilst holding it close to the fitting the pipe can be pulled out.

The dismantling process differs slightly with each manufacturer and their advice should be sought if there is an issue. This joint system is a great asset to the plumber and is used by professionals such as Harrow Boiler Breakdown .
“